国产精品视频一区二区三区不卡_亚洲精品久久久久久久久久久捆绑_国产大屁股喷水视频在线观看_中文字幕无码人妻少妇免费_天堂网www资源在线

ZJ-EP510
Two component epoxy potting adhesive

ZJ-EP510 is a two component epoxy adhesive that solidifies to form an elastomer with excellent properties such as aging resistance, vibration fatigue resistance, and low temperature corrosion resistance. ZJ-EP510 not only has adhesive sealing properties for metal substrates, but also is suitable for adhesive sealing of low surface energy substrates such as PVC and PC. ZJ-EP510 meets the requirements of low odor, low VOC emissions, EU ROHS regulations, and UL94 flame retardant V0 requirements. ZJ-EP510 is suitable for machine dispensing and manual mixing operations. ZJ-EP510 is mainly used for insulation, waterproofing, and sealing of small and medium-sized electronic components.

Product features

Wide adaptability of substrate

Excellent aging resistance

Flame retardant V-0

Product parameters
Performance before curing Unit Typical value Test method
Appearance

A: Black fluid

B: White fluid

Visualization
Density

g/cm3

A: 1.55 ± 0.05
B: 1.55 ± 0.05

Cure: 1.55 ± 0.05

GB/T 533-2008

Viscosity

cps

A: 20,000~30,000
B: 20,000~30,000

GB/T 2794-2013, 10 rpm

Mixing ratio

v/v

1:1

Surface drying time

min

> 30

GB/T 13477.5-2002

Initial curing time

min

< 60

50 °C/50 %RH

Hardness

Shore-D

72 ± 5

GB/T 531.1-2008

Thermal conductivity

W/m.k

0.6

ASTM D5470-2017

Volume resistivity

ohm.cm

≥ 1*10^12

GB/T 1410-2006

Flame retardancy

V-0

UL94

Body tensile strength

MPa

≥ 25

GB/T 528-2009

Elongation at break

%

≥ 5

GB/T 528-2009

Tensile shear strength (Al – Al)

MPa

≥ 8

GB/T 7124-2008

The data in the table is for reference only, please refer to the measured data.
Operation and Safety
  • usage method:
  • ? Surface cleaning
  • Use gauze or other tools to remove dust, loose materials, oil stains, and surface water stains from the surface of the area that needs to be coated. If there is rust on the area that needs to be coated with glue, first remove it with a metal brush, and then wipe the surface with acetone and alcohol.
  • Primer and cleaning agent
  • To achieve optimal adhesion performance, corresponding primers and cleaning agents should be used. When applying primer and cleaning agent, it should be ensured that the application is uniform and there is no accumulation of primer or cleaning agent or the surface of the substrate is not covered.
  • ? Mixing
  • Take out component A and component B in proportion, stir and mix evenly, vacuum to remove bubbles, and pour them onto the product to be sealed during the operation period. If the sealed product is too large, it is recommended to seal it in batches.
  • matters needing attention:
  • When ZJ-EP510 two-component epoxy structural adhesive is used in immersion applications, it should be fully cured before immersion.
  • Wet coating technology is not allowed, and it is recommended not to use solvents, water, cleaning agents, or soap solutions.
  • Before consulting the technical personnel of Zhijiang, it is not allowed to use high chlorine disinfection areas such as swimming pools.
  • Moisture can have a negative impact on the curing process and final strength, and it is necessary to prevent the main agent and curing agent from getting damp. Keep the packaging sealed and store in a dry place. The surface on which the substrate is bonded must be clean, dry, and free of dust and any grease. Before using this product, the main agent must be stirred evenly. Our company's technical department can provide further detailed information.
  • Pre test procedure
  • In order to eliminate potential problems in the application site, Zhijiang can sample various materials used for adhesives, pre determine the best adhesive to be used, and develop the best surface treatment method to obtain the best adhesive performance. Please consult the technical personnel of Zhijiang for specific information.
Color and packaging

According to customer requirements, we can provide 20 L small barrels and 200 L large barrels for packaging

Storage and expiration date

It is recommended to store in a cool and dry place for a storage period of 6 months;

Incorrect storage conditions can affect product application and performance after curing

伊人久久大香线蕉综合网站| 丰满熟妇被猛烈进入高清片| 日本三级香港三级三级人!妇久| 精品国产成人亚洲午夜福利| 精品人妻少妇一区二区| 欧洲美女黑人粗性暴交视频| 欧美日本精品一区二区三区| 欧美日韩国产精品自在自线| 国产成人精品亚洲777| 欧美伊人色综合久久天天| 日日av拍夜夜添久久免费| 亚洲精品一区二区另类图片| 中文天堂国产最新| 精产一二三产区m553| 国产偷国产偷亚洲清高| 亚洲熟妇无码乱子av电影| 色窝窝无码一区二区三区成人网站| 337p西西人体大胆瓣开下部| 成人精品一区日本无码网| 熟睡中被义子侵犯在线播放| 久久精品这里热有精品| 国产成人精品无码免费看夜聊软件| 一本一道人人妻人人妻αv| 中国极品少妇videossexhd| 亚洲人成色在线观看| 97久久人人超碰国产精品| 全免费a敌肛交毛片免费| 国自产拍偷拍精品啪啪模特| 国产中年熟女高潮大集合| 老头边吃奶边弄进去呻吟| 成人免费视频一区二区| 337p日本欧洲亚洲大胆色噜噜| 国产成人无码a区在线观看导航| 人人爽人人爽人人爽人人片av| 国外亚洲成av人片在线观看| 亚洲av永久无码精品网站色欲| 国产精品久久久久蜜臀| 无码人妻少妇色欲av一区二区| 亚洲熟妇无码一区二区三区导航| 国产午夜精品一区二区三区嫩草| 加勒比一本heyzo高清视频|